Control Yoke Collars

Re: Control Yoke Collars

I will take a set Thanks !
 
Re: Control Yoke Collars

Hi All,

We are close to the 50 requests I need for the run of collars.
Please keep those requests coming!

Jim
 
Re: Control Yoke Collars

I'll take a set.
 
Re: Control Yoke Collars

Jim, I'll take set too.


Sent from my iPhone using Tapatalk
 
Re: Control Yoke Collars

I would go for a set
 
Re: Control Yoke Collars

I'm in for one set please.
 
Re: Control Yoke Collars

I'll take a set. Thanks
 
Re: Control Yoke Collars

I am in for a set.

Is the install fairly straight forward? Which part is this?

Thanks
 

Attachments

  • Capture.jpg
    Capture.jpg
    17.1 KB · Views: 0
Last edited:
Re: Control Yoke Collars

put me in
 
Re: Control Yoke Collars

I am in for a set!
 
Re: Control Yoke Collars

same with us....
 
Re: Control Yoke Collars

I will take a set
 
Re: Control Yoke Collars

Have we made it to 50 yet?
 
Re: Control Yoke Collars

Hi All,

Thanks very much for participating in the pre-buy of new shaft collars for your Commander.

We will be shipping next week.

I will need your current best email address in order to invoice you, and to send you the FAA paperwork for these parts.

Please email me at jrichards@aerodyme.com.

Thanks,
Jim
 
Re: Control Yoke Collars

Hi All,

The collars are ready to ship.

Please confirm your email address by sending me an email to:
jrichards@aerodyme.com

Thanks,
Jim
 
Re: Control Yoke Collars

Count me in for a set.
 
Re: Control Yoke Collars

Jim,

We just finished our annual. I will defer my interest if someone else would like the yoke collar.

Doug
 
Re: Control Yoke Collars

Hi All,

We have shipped all requests for 112 s/n 221 and subsequent serials and models. The 112's sub s/n 221 use a different part number. We need to run an installation check for those airplanes. Is anyone interested in a free set in return for helping us check the new collars in any 112 s/n 1 thru 220?

The new PayPal-based process did save time and money, although, as with all software, there were some disappointments. About 75% of you paid by PayPal account or cc via PayPal. The 25% who asked for conventional handling probably cost us roughly twice the total time it cost to handle the entire 75% through PayPal. All in all, it worked well enough in streamlining our process that for future special offers we will set two prices: regular, and then lower for using the PayPal process.

Thanks all very much!

Thanks,
Jim and Martine
 
Re: Control Yoke Collars

Hi All,

Today an owner reported installing a new collar and finding no difference between the new and old.

Allow me clarify:

The controls geometry requires the collar to move as the yoke shaft slides in and out, and safety margins must be maintained on collar ID to prevent drag in the controls. Thus, there are no dimensional changes from the old to the new, only a change of material to make the parts more "slippery". The usual complaints about old collars are that either (a) they are dragging, or (b) they have cracked.

Thanks,
Jim
 
Last edited:
Re: Control Yoke Collars

jrichards said:
Hi All,

We have shipped all requests for 112 s/n 221 and subsequent serials and models. The 112's sub s/n 221 use a different part number. We need to run an installation check for those airplanes. Is anyone interested in a free set in return for helping us check the new collars in any 112 s/n 1 thru 220?

The new PayPal-based process did save time and money, although, as with all software, there were some disappointments. About 75% of you paid by PayPal account or cc via PayPal. The 25% who asked for conventional handling probably cost us roughly twice the total time it cost to handle the entire 75% through PayPal. All in all, it worked well enough in streamlining our process that for future special offers we will set two prices: regular, and then lower for using the PayPal process.

Thanks all very much!

Thanks,
Jim and Martine
Click to expand...

Hi Jim,
I have s/n 151 and can help out with a fitting check if you need.

Thanks,
Ken
 
You must log in or register to reply here.
Back
Top