• Welcome to the new Commander Owners Group Forums. Please bear with us as the kinks are worked out and things are tweaked. If you have any questions or issues with the new platform, please post them here.
UH1CW2
Reaction score
508

Profile posts Latest activity Postings About

  • I thought I ordered that oil magnet chip for my engine. Can't find it, so, maybe I didn't.
    Do your records show that I did?

    Frank Lambert
    Commander 114 IO 540
    UH1CW2
    UH1CW2
    I havent finalized the design or validation yet. None have been sold or sent out. However, I think I sent you a set of pressure gages.
    Phil, Ck will be mailed Monday for 160.00

    Thanks,
    Frank Lambert
    UH1CW2
    UH1CW2
    Thanks Frank. You're going to like these gages and hoses. Great quality parts.
    Hi Phil...saw your control knobs on the ramp at the fly in today. Would you send a set to Australia please?? MJL
    UH1CW2
    UH1CW2
    I only have mixture and prop knobs. All out of throttle knobs. Mixture and prop are 55 dollars each.
    Phil
    Your efforts, knowledge and products have been amazing in the short time you have been with this group, not to mention your kindness which comes through.
    There are several know-it-alls within the group, but most often they lose interest or are quickly exposed.
    On behalf of myself and many others we hope and really request that you still stay involved.
    Thanks again for all you have already done!
    John
    UH1CW2
    UH1CW2
    I have no idea what they are talking about with most of those parts. you can see the pump I took apart in the picture. there are no valve seats or Ball seats or valve cores. The spiral pin is the 1/8th roll pin .12 cents, Strainer, may be the screen but it is stainless steel and just gets cleaned. I have no idea what SHIM pack they are taking about as there are no shims in this unit. These are just made-up names of parts that are not in that pump assembly. There are no VALVES OR CORES. there are springs and balls, all cost just pennys. There are a total of 6 O-rings about 11 cents each. I just purchased them today.
    Thanks, Phil for the gas caps. I appreciate that you sent them, but have no idea what I did that prompted you to send them. Hopefully, I can return the favor somehow.

    BTW they are absolutely professional.

    Frank
    UH1CW2
    UH1CW2
    Thanks for the nice comment.
    Hi Phil, do you have any of the knobs left that you previously made? I’m looking for the one you had that was labeled “Propeller Knob, Mixture Knob and Non TOGA button Throttle Knob Set $155.00” that was in an old post.
    Thanks
    UH1CW2
    UH1CW2
    They are 165.00 for non toga set.

    Just send a check or money order to:

    Phil Camarda
    32037 29 Mile Rd
    Lenox, Michigan.48050

    Include your return address, email and phone number. Write on the check what it is for.

    Phil
    Rcahamilton
    Rcahamilton
    Check is in tomorrow’s mail. Thanks
    Phil,

    Do you have any of the control knob sets left. I would like to order a set without the TOGA
    UH1CW2
    UH1CW2
    Yes, just send a check or money order for 165.00 to:

    Phil Camarda
    32037 29 Mile Rd
    Lenox, Michigan. 48050

    Include your return mailing address, phone number and email. Make sure you also say you want the control knob set.
    Phil, Did you ever pursue the seat adjustment handles project I vaguely remember reading about? My pilots’ side fore /aft adjustment handle has come loose on the shaft and I need to drill out the remains of the set screw that holds it in place. It’s a tiny little devil and not very accessible. Just wondering what you did. Thanks again.
    UH1CW2
    UH1CW2
    I'll send you a set, what is your full mailing address. just email it to Commander1369JAGmail.com
    Hello Phil , received your Control Knob Set today , beautiful work will install next annual due in August .
    Looking at the two Red Mixture Knobs , I realized my Ooop"s . I meant to order an extra Non TOGO Throttle Knob , I do not have a function right now for the TOGO Button , would have installed the Non TOGO and left the TOGO Throttle Knob for the next owner down the Road .
    Hmm sounds confusing , I guess it's having Suspenders and a Belt .
    Bottom Line if you have an Extra Non TOGO Throttle Knob ,call or text 830 220 8339 and let me know how much $ .
    If you are Short One Mixture Knob , well I have an Extra one ,the Color is similar to my 1971 911E Targa Porsche just maybe ??? .
    I like the new set a lot , the original Knobs show there age , some 30x Years and 1950 hrs since new it is a great Airplane .

    Best Wishes
    Juergen

    N5893N 114AGT
    jak114agt@gmail.com
    830 220 8339
    UH1CW2
    UH1CW2
    I sent you and eMail.

    Phil
    If you have a complete set I would like to buy one and let me know and will pay for the same asap? Best to reach me by email as I am not on the forum much.

    EMail:

    CENTRALAIR-HEATING@ATT.NET

    Thanks

    Paul B. Richard
    Can I Venmo you the money for TOGA set. I'd rather not advertise the purchase and have a paperwork trail. There is no charge for the use of it.
    UH1CW2
    UH1CW2
    You can just wrap cash in a white piece of paper and send it in a letter. No paper trail. I don't take electronic funds for this kind of stuff unless it is an overseas purchase. Then I only allow the purchase through the web site.
    Phil, send me your email or send an email to you and we will copy Charlie on reply response as he and I are good friends and get you some landing info help you asked for. My email is jay.hardee@mail.com
  • Loading…
  • Loading…
  • Loading…
Back
Top