FS

Frank
Heading your way tomorrow ISP.
Any chance you might be around?
Lunch at the meatball place across from the airport?

Fred

Frank,

Dave Kalbach suggested I contact you regarding a replacement torque tube for my 1976 114.
The part that I am referring to is on page 2-4-32 of the Commander 114 Parts Manual.pdf from the website and labeled as part 47. It became a victim of a tug incedent while moving.

Thank you for any help you might be able to provide.

Frank,
Someone contacted me with an aileron off a 77 114
Will it fit my 73 112.


Marcelo

Hi Frank! Sid needs to know if Barry mounts (vs Lord) are approved/available /source for 114B I0-540 T4B5. Part #. Sid # is 248 227 5665. Thanks Sherman 410 302 3930

Frank

Finally got time to replace the flap selector switch today. What a pain!
Wanted to thank you again for the part number and confirm that it was a direct replacement. The Baton had to be drilled and tapped, but otherwise a direct fit.

The one that came out had part numbers of 8832k6 and ms35059-31 printed on it.

Joel

Hi Frank
Do you have anymore medallions??

Eric Bester

Hi Frank,the logo looks great,I like it.Please send me 2x since I will not be able to come to the Fly Inn at FL.Juergen Koehn,P.O.Box 4791,Lago Vista,Texas,78645 I need your add. so I can mail you a check.Safe travel Juergen

Frank,
I’m attempting to chase an STC for the Commander leading edge light installation. Spoke with Gen Av, OH who referred me to you.
I don’t imagine the kit is still available from the separate listings on the COG.
Any advice / update on acquiring a wing light kit for a 1978 114?
Thank You Sir!! V/r John

Frank, I need a bearing for the elev control horn on my 114. Part #FF310-3 -- Parts Manual Fig 2-35 #83 -- Commander Primer does not have. I just know you have one in your back pocket or know where to get it. ---- Thanks Brad Docken dockpalm@yahoo.com --- 605-574-4952